How to Use: PVC Size Adapters

Jump to 3/4" Pipe to 1-1/4" Fitting Adapter   |   Jump to 1/2" to 1" Snap Adapter

To connect 3/4" Pipe to 1-1/4" Fitting Adapter:

Insert PVC Pipe into Adapter

1. Insert a 3/4" Size PVC pipe segment into the 3/4" Pipe to 1-1/4" Fitting PVC Size Adapter.


2. Press or tap into place until the pipe is fully seated inside the adapter.

Insert Adapter into PVC Fitting

3. Insert the Adapter into the socket of a 1-1/4 in. Size PVC fitting.

Tap Adapter into Place until Fully Seated

4. Press or tap into place until fully seated inside of the 1-1/4” fitting.

Securing

While friction alone should keep the PVC Size Adapter in place, use PVC cement for a completely secure connection.

For additional information, please see our PVC Assembly Guide.

To connect 1/2" pipe to 1" Pipe Snap Adapter:

Insert PVC Pipe into Snap Adapter

1. Insert a 1/2" Size PVC pipe segment into the smaller perpendicular port of the PVC Snap Adapter.

Tap Snap Adapter into Place

2. Press or tap into place. Secure with PVC cement if a permanent connection is desired.

Snap Adapter onto 1" PVC Pipe

3. Snap the Adapter onto the outer wall of a 1" Size PVC pipe.

Do not PVC cement Snap Adapter

4. Do not use PVC cement on the snap segment of Size Adapter, unless you wish for it to be connected permanently.

Securing

While friction alone should keep the 1/2" port of the PVC Size Adapter in place, use PVC cement for a completely secure connection.  

For additional information, please see our PVC Assembly Guide.