DIY PVC Truck Bed Bike Rack for the Ford Maverick
Matt Hawkins from Cleveland, OH, wanted a simple, affordable, and secure way to haul his fat-tire e-bikes in his Ford Maverick. Most commercial racks either required a trailer hitch or removal of the front wheels — neither of which fit his needs. So, he decided to design his own PVC truck bed bike rack that was lightweight, durable, and easy to remove when not in use.
The Challenge
Matt initially considered a welded metal rack, but quickly realized it would be heavy, require specialized tools, and make his truck bed difficult to use for other hauling needs. After seeing other PVC-based bike racks online, he knew PVC was the right direction — he just needed a design strong enough to support fat-tire e-bikes weighing up to 75 lbs each.
Designing the Rack
After reviewing the FORMUFIT Furniture Grade PVC specifications, Matt chose our materials for their five-times greater strength than plumbing-grade PVC, as well as their UV resistance, impact durability, and color options that eliminated the need for painting.
Using Fusion 360 CAD software, Matt imported pipe and fitting data from our technical sheets to digitally model the project. This allowed him to verify exact measurements and confirm that his rack would fit perfectly inside the Maverick’s bed — supporting two e-bikes with 4” x 28.75” tires, or one centered bike if needed.
Material Selection
For stability and fit within the truck bed, Matt used 1” Size Furniture Grade PVC for the rack base. He also combined 1” Internal Dome Caps and 1” External Flat End Caps for a secure fit against the truck bed walls.
“The open ends of the PVC pipe that touch the truck bed walls use internal dome caps and external caps. The inner caps fit inside the horizontal ends near the cab, while the flat back section uses external caps for more surface area to hold everything in place.”
Parts List and Cost
“I ordered three two-packs of 1” PVC pipe at 60”, 22 standard tees, two 90° elbows, two internal dome caps, and two external end caps — about $150 total with free shipping. It arrived fast! If you measure carefully, you’ll even have one 60” piece left.”
Assembly and Fit
After cutting the pipe to size, Matt used clear PVC cement and a rubber mallet for precise connections. He assembled the tire slots first, then connected the sections, leaving the bed-contact ends for last to fine-tune spacing. Once completed, he secured the rack using velcro straps attached to the factory tie-downs.
Final Thoughts
“It works great! It doesn’t weigh much and has just enough flex to hold the tires snugly once strapped down. I never thought it would work this well or look this good. Let’s see what you can make with FORMUFIT!”
11 comments
From one of the last pictures it looks like one of the angled support legs was broken/missing. What caused this and would you do something different to prevent this from happening?
I have a 2022 Honda Ridgeline, can you build one for 2 e bikes with 4 inch tires?
I have great interest in building this ebike pick up truck bed bike rack….Is there a way to reduce # of cuts in 60" pipe cuts? I have a full size pick up truck. And throught is there a way to ordering…standard tees (that are cut in half), then I could glue them together?
I am interested in making this Truck Bed Rack for E Bikes. To reduce total # of cuts, is there any way to order your “standard tees” that could snap right onto regular 60" long bar, as I have a full size truck with 60" wide truck bed. So, in more simple terms is there a way to buy each “standard tee” in two halves each, then apply PVC Cement to put together onto 60" long pipe?
When I built this, I didn’t have a bed cover. I’m working on a new style bike rack that is compatible with a bed cover and can also be used to help haul lumber with the flex bed slots. Stay tuned!